Many times due to bad weather mostly our television shows NO Signal Sign. This is because rays from the satellite face difficulty in reaching our receivers due to cloudy weather.
In such cases, it is very normal for your television to show a No Signal message. All you need to do is wait for the weather to get better. However, if the weather is good and still your television is showing No Signal then it must be a technical error. So, in this article, we will see how to fix my tv when it says no signal?
Table of Contents
Why is my TV showing No Signal?
Your local television broadcasts might not be picked up by your over-the-air TV antenna, and you won’t know what to do. The remote control should turn the television on when you press the power button. Then how come my HDTV isn’t giving me feedback and showing No Signal? As you may know, if you have cut the cord and are no longer using cable TV or satellite television, you can no longer contact the service provider for help.
To start, check all of the cables and plugs, such as the power connection to a connected device. Verify that you’re getting the proper signal from your cable box or satellite box as well. If you wish to determine the cause of the outage, take a methodical, step-by-step approach rather than panicking. You’ll be able to troubleshoot issues faster and find solutions.
As we were saying, you might need to check your roof or the interior of your home for the fault. Additionally, if you are using an antenna, the problem may be due to the broadcast.
As a result of the nation’s switch to 5G, the FCC is currently repacking channels. It is possible that a channel could suddenly vanish.
Due to 5G wireless, the Federal Communications Commission (FCC) has moved various TV frequencies to wireless service providers, thus relocating some from television broadcasters.
The changes in broadcasting and 5G wireless could make your favorite channels disappear since they use a commercial spectrum. However, you need not worry, your TV service will simply be moved to another location.
In September 2018, the FCC launched a repack of its broadcast spectrum that will continue until July 2020.
If this is the case then the reason why your favorite channel seems to disappear while others remain may have nothing to do with your home entertainment setup.
This was only about your favorite channels showing No Signal. But what about when your whole television is showing No Signal.
In that case, you can follow these steps.
Ways To Fix Your Tv During No Signal
It’s easy to assume the location of the problem within your home when you determine your lack of TV signal isn’t an external issue such as changing broadcasting channels or weather interference.
The first step in resolving the issue is understanding what can go wrong by following a checklist. To make this a quick read, we will begin with tips on common issues, followed by tips on rarer issues.
1. Analyze The Plugs And Cables
The most common cause of a “no signal” message is an incorrectly attached HDMI cable.
HDMI cables sometimes wiggle too loosely or partially fall out of a port due to wear on either end.
Maybe you should consider replacing the cable with one that locks. By doing this, the port will be sealed to prevent a recurrence of the same problem.
You need to determine if there’s a second HDMI port on your TV, and then you need to switch to it. If the HDMI port on your TV is damaged, connect it to the other HDMI port. For repairs or maintenance, a professional will have to repair or replace any HDMI ports that are damaged.
As soon as the connections have been checked and restored, rescan the channels to determine if the issue has been resolved. Otherwise, you might want to think about what your TV antenna’s connections are doing.
You can also use the steps above to your set-top box or external tuner if you are connected to one.
2. Restart All Connections After Double-Checking
In the event that your television is not showing any signal, you might not have the correct input or source selected.
In cases like this, we recommend consulting the manufacturer’s documentation, whether it be part of the installation manual that usually comes with your TV or device when you buy them, or on the company’s support website.
To choose the right input source, press the input button on the remote. Before going to complex solutions, it’s worth trying this out even if it doesn’t work.
The television must be powered on before you connect any source devices. It’s easy to see that your television is already on if you notice a “no signal” message.
Ensure that your television system is restarted. You can do this by turning off the TV, waiting a few minutes, and then turning it back again. Reset the device if necessary.
The problem should be resolved as a result of this.
If the problem hasn’t been solved, you need to determine the scope of the issue. Does your household have a single TV, or are there multiple ones? The problem may lie in this area, so this information is important.
When you have only one HDTV that displays a “no signal” message, you should then check which other input devices you have connected to your TV via HDMI or the antenna.
3. Antennas Should Be Checked
If the problem persists on more than one television set, the cause might be your OTA antenna.
In order to determine where the problem originated, it will be necessary to go further up the chain. Coaxial cable or a connection may be damaged or corroded. This possibility can also exist with other devices such as preamplifiers or splitters.
Make sure that all coaxial cables are connected correctly. Invest in new pieces that are broken, worn, or appear to be ill-fitting.
Occasionally, you will find that outdoor connections have corroded and been rendered inoperable by weather. In order to prevent a repeat of the issue, they need to be replaced or waterproofed.
You may have to inspect the antenna if the problem does not seem to be indoors. The antenna infrastructure may need to be checked again if weather conditions have been bad lately or if it is aging.
Signal quality may be adversely affected if the antenna is mounted on a pole that changes direction in the wind.
The antenna pole may need to be fastened on-site with galvanized steel wires to prevent wind and weather from moving the pole too much.
Final Words
This article on how to fix my tv when it says no signal must have given you great insight. You will now be able to solve this issue by yourself.
However, It is always better to call a professional for help if you are not confident enough to solve the issue yourself. A professional will be able to detect more underlying issues which we would normally miss out on.